NIPUER-23/3000/4500

Bridge structure with useful working areas of 3000 or 4000 mm in length and 1350 mm of width with the following configurable on-demand equipment:

Head composition depending on the needs of the customer:
- Different head configurations multigroup drilling both vertically and horizontally.
- Head with fixed groups direct attack tool by means of clamps or milling group with tool changer of 8 position of tool attack through cones ISO-50 or HSK FR 63.
- Spindles powers 2 - 5.5 - 7.5 to 12.5 kW.
- Horizontal milling groups direct or with angular transmission.
- Programmable saw unit 360 degrees with drilling and milling elements incorporated 4 axis.
- Saw group programmable from 0 to 90 degrees without forwarding.
- Saw group 45 -45 degrees directly, without forwarding.
- Anti-chips system for machining the bolts and hinges.
- Approximation meters (probes) in the horizontal groups.
- Pneumatic copiers in vertical milling groups.
- Pneumatic copiers in the saw from 0 to 90 degrees.
- Laser mapping system to position the pieces with marquetry over the table.

Working tables:
- Mobiles with subjection system by independent suction cups.
- Mobiles with fix jaws.
- Fixed with slotted table.
- Chip collection system below.
- Fixing system of door frames for machining.

Programming:
- System programming and cad-cam adapted to the application requested.
- Program loading through bar-code reader.
- Remote assistance and trouble diagnosis via Internet.